Universal Microwave Diode for WB27X10597 W10492276 2 PCS

Ohmmonburged is the listing 's First and Original Builder and Provider, Only he can ensure the quality and service betterMicrowave diode's valve voltage is more than 3 VDC, so many digital multifunction meter can not test it bad or not, because only 3 VDC battery insideAdvise to use traditional anolog meter to test it because it has 9 VDC battery insideDetail testing shown in my production photoesGeneric Microwave High Voltage Diode 2 PCS for YouPack Items: 2 PCSCommon Questions and Answer by SellerQuestion 1:Does this diode universal and generic for microwave high voltage diode?Answer:Yes. Most home microwave high voltage diode's withstand voltage is 12kv, rated current is 350mA(0.35 amp). Few are 450 mA rated current,normally it is diode CL04-12.Question 2: What will be happen when microwave diode broken?Answer: It will not heat food. High voltage fuse after transformer will burnt.Question 3: How can I check hv diode broken or not?Answer:First check the low voltage side's fuse(power input side) burnt or not,then check high voltage fuse after transformer burnt or not, if burnt, the hv diode is broken or burnt. Finally you can check diode good or broken with a electrical meter.Final Remark:1. Safe is first, power off and conform high voltage capacitor released high voltage first2. Check your old and original diode's terminal size first, some new microwave's female spade terminal is 3/16in standard, yet this is 1/4 in standard.3. Ohmmonburged will provide some 3/16 in female spade standard diode for you then.

• High Voltage Specifications: Microwave High Voltage Diode with 12 KV withstand voltage, 450 mA rated current, 4.2mm/0.17in O Terminal Diameter, and 1/4 in/6.3 mm standard female terminal size
• Wide Compatibility: Compatible and directly replaces GE WB27X10597 and Whirlpool W10492276 high voltage diodes for microwave ovens
• Enhanced Safety Design: Features heat shrink tubing on female side for long-lasting protection, widely used for microwaves, replaces high voltage diodes marked T4512, 4512, CL4512, CL04-12
• Testing Requirements: Use an analog multimeter with 9 V DC battery to measure the diode's polarity, as its gate voltage exceeds 3V DC which most digital multimeters cannot properly test
• Package Contents: Includes 2 pieces of universal microwave high voltage diodes suitable for most home microwave repair and replacement needs