TB600 Hydraulic Gate Closer, 150-250 lb Heavy Duty for 44-72 Inch Outdoor Gates, Automatic Gate Closer, More Powerful Than TB200 & TB400, Adjustable Closing Speed for Wood, Steel & Vinyl Gates

The TB600 Hydraulic Gate Closer provides controlled automatic closing for sturdy outdoor pedestrian gates. It is designed for gates weighing 150 to 250 lb and measuring 44 to 72 inches wide, making it suitable for residential, agricultural and commercial entrances.ADJUST THE CLOSING SPEEDThe hydraulic closing mechanism allows the closing speed to be adjusted according to the gate size and operating conditions. Controlled movement helps reduce sudden slamming and guides the gate toward a more consistent closed position. Make adjustments gradually according to the installation instructions.FLEXIBLE INSTALLATIONThe closer can be installed at the top, middle or bottom of the gate. It works with left- and right-hand gates and supports properly configured in-line or offset hinges. The unit mounts on the opening side of the gate and pushes the gate closed.WIDE RANGE OF APPLICATIONSSuitable for: Wood gates Steel gates Vinyl gates Yard and fence gates Farm and ranch gates Warehouse and courtyard gates Outdoor pool-area gates Sports facility and pedestrian access gatesChain-link gate installation requires a compatible mounting adapter, which is not included unless specifically shown in the package contents.PRODUCT SPECIFICATIONSModel: TB600Recommended Gate Weight: 150-250 lbRecommended Gate Width: 44-72 inchesMaximum Opening Angle: Approximately 100 degreesOpening Pressure: Approximately 8-18 lbOperation: Hydraulic automatic closingMounting Positions: Top, middle or bottomGate Orientation: Left- or right-hand gatesCompatible Gate Materials: Wood, steel and vinylColor: BlackFinish: Painted protective finishPACKAGE CONTENTS 1 × Hydraulic Gate Closer 1 × Fitting Bar 1 × Retaining Bar 1 × Post Bracket 1 × Gate Bracket Securing Pins Spacers Lock Nuts Washers 1 × Installation GuideIMPORTANT INSTALLATION NOTES Install only on a sturdy, properly aligned gate and post. A gate stop is required to prevent excessive opening. Do not install directly on bulldog or strap-style hinges. Release spring tension before installation if the gate uses tension or spring hinges. Chain-link gates require a compatible mounting adapter. Professional installation is recommended if you are unfamiliar with hydraulic gate hardware. This product is a gate-closing device and does not replace a gate latch or lock.

• 【MORE POWERFUL CLOSING FORCE】TB600 OUTPERFORMS TB200 & TB400, Built with higher-strength performance than TB200 and TB400 models, the TB600 delivers greater closing power and more reliable door operation. Lower-force models may struggle to provide sufficient opening and closing performance on certain doors, especially heavier or high-resistance doors. With its increased closing force, the TB600 provides stronger, smoother, and more consistent operation across a wider range of applications
• 【COMPLETE INSTALLATION HARDWARE】Ideal for heavy residential doors, commercial entry doors, apartment and condominium entrances, office doors, warehouse doors, workshop doors, storefront doors, exterior doors, security doors, community access doors, and other high-traffic or heavy-duty doors. When you need stronger and more dependable performance, TB600 is the better choice over TB200 and TB400
• 【ADJUSTABLE HYDRAULIC CLOSING】Fine-tune the closing speed to suit the gate and installation environment. The hydraulic mechanism delivers a smoother, more controlled closing motion to help reduce hard slamming while supporting consistent gate latching
• 【OUTDOOR-READY METAL CONSTRUCTION】Built with a solid all-metal structure and a black protective finish for demanding outdoor gate applications. Suitable for yards, farms, ranches, warehouses, courtyards, pool areas, sports facilities and other pedestrian entrances
• 【FLEXIBLE MOUNTING POSITIONS】Installs at the top, middle or bottom of the gate and works with left- or right-hand gate configurations. The closer mounts on the opening side and pushes the gate closed. A gate stop must be installed to prevent the gate from opening beyond the rated angle