Strap Leather Cutting Die, Steel Blade Wooden Base Die Cutter - Cuts 105mm x 20mm (4.13 x 0.79 in) Blanks for DIY Bracelets, Keychains, Fobs, Cable Organizers & Leathercraft

Cut Perfect Leather Straps In One Strike - no tracing, no trimming, no guesswork. The Visslloy Leather Cutting Die cuts a clean, repeatable 105mm x 20mm strap blank with a single mallet strike.Cut Perfect Leather Straps In One StrikeCutting leather by hand with scissors or a utility knife takes time, and the results are rarely consistent. One slip, and a crooked edge ruins the piece. The Visslloy Leather Cutting Die changes that — a steel blade embedded in a solid wooden base that cuts a clean, repeatable 105mm x 20mm strap blank with a single mallet strike. No tracing, no trimming, no guesswork.Steel Blade Meets Sturdy WoodThe raised steel cutting edge sits securely in a thick wooden base that stays put on your workbench. Place your leather flat over the die, strike firmly, and the blade shears through with clean edges every time. The steel holds its sharpness through dozens of projects, and the wood base absorbs impact without cracking or splintering. Whether you are working with soft garment leather or heavier 4-5 oz tooling leather, each strike delivers a ready to use strap blank measuring 105mm by 20mm.One Shape, Endless PossibilitiesThe 105mm by 20mm strap blank size is sized for the projects leather crafters reach for most. Cut uniform strap blanks for bracelets. Punch out leather cable organizers and cord keepers. Make matching fobs and keychain straps. Produce bag handles and wristlet straps in consistent sizes. Create watch band blanks ready for stitching. Once you have the die, you can batch out identical pieces in a fraction of the time hand cutting takes.A Tool That Grows With YouBeginners appreciate how this die removes the hardest part of leatherwork — cutting clean, repeatable shapes by hand. Experienced crafters and small batch makers value the speed and consistency it brings to production runs. Pair it with your existing mallet, arbor press, or clicker press and start cutting stacks of identical 105mm x 20mm blanks in minutes rather than hours.What's Included1 x Visslloy Leather Cutting Die — Steel Blade, Solid Wooden Base, Strap Shape, Cuts 105mm x 20mm (4.13 x 0.79 Inch) Blanks

• 𝐒𝐭𝐞𝐞𝐥 𝐁𝐥𝐚𝐝𝐞 𝐖𝐢𝐭𝐡 𝐒𝐨𝐥𝐢𝐝 𝐖𝐨𝐨𝐝𝐞𝐧 𝐁𝐚𝐬𝐞: The Sharp Steel Cutting Edge Is Embedded In A Sturdy Wooden Platform, Delivering Clean Precise Cuts Through Both Thin And Thick Leather. The Blade Holds Its Edge Through Repeated Use, Giving You Consistent Results Across Multiple Projects Without Deformation.
• 𝐐𝐮𝐢𝐜𝐤 𝐀𝐧𝐝 𝐄𝐟𝐟𝐨𝐫𝐭𝐥𝐞𝐬𝐬 𝐂𝐮𝐭𝐭𝐢𝐧𝐠: Tap by hand or strike with a mallet - the raised steel edge cuts in one motion, Apply Firm Pressure With A Mallet Or Press, And The Raised Steel Edge Cuts Through In One Motion. Produces Clean Edges Free Of Fraying Or Ragged Tears — Significantly Faster And Neater Than Tracing And Hand Cutting With Scissors Or Utility Knives.
• 𝐕𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐞 𝐒𝐭𝐫𝐚𝐩 𝐏𝐮𝐧𝐜𝐡 𝐌𝐨𝐥𝐝 𝐅𝐨𝐫 𝐃𝐈𝐘 𝐏𝐫𝐨𝐣𝐞𝐜𝐭𝐬: Each Strike Cuts A 105mm X 20mm (4.13 X 0.79 Inch) Strap Blank, Ready For Immediate Use. Ideal For Making Leather Straps, Bracelets, Cable Organizers, Keychain Fobs, Bag And Purse Handles, Wristbands, Watch Bands, And Custom Small Accessories. A Practical Addition To Any Leathercraft Workshop Or Hobby Setup.
• 𝐃𝐮𝐫𝐚𝐛𝐥𝐞 𝐋𝐨𝐧𝐠 𝐋𝐚𝐬𝐭𝐢𝐧𝐠 𝐂𝐨𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧: The Steel Blade Resists Rust And Edge Dulling, While The Solid Wood Base Stays Stable And Non Slip During Striking. Designed To Withstand Repeated Workshop Use For Hobbyists Crafting At Home And Small Production Runs In Studios Alike.
• 𝐁𝐞𝐠𝐢𝐧𝐧𝐞𝐫 𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 𝐍𝐨 𝐌𝐚𝐜𝐡𝐢𝐧𝐞𝐫𝐲 𝐑𝐞𝐪𝐮𝐢𝐫𝐞𝐝: Simply Position The Die, Align Your Leather, And Strike. Works With Standard Leatherworking Mallets, Presses, And Arbor Presses. No Complex Setup Or Power Tools Needed. Whether You Are Just Starting Your Leather Craft Journey Or Expanding An Established Tool Collection, This Die Fits Right In，also a thoughtful gift for leather crafters, DIYers, and parents on birthdays, Father's，Day, and holidays.'