Hillman Zinc-Plated Steel Single-Hole Clevis Pins, 1/4 x 2 in, 6 Pk

Product Description Hillman Single-Hole Clevis Pins form the load-bearing hinge point that joins a clevis, yoke, or bracket to the hardware it pulls. The pin slides through the aligned holes in the prongs of a clevis and captures a link, arm, or fitting between them, which is how linkage and pulling gear is connected on tractors, trailers, and heavy equipment. Each pin measures one-quarter of an inch in diameter by two inches long, with a flat retaining head at one end and a single cross-hole drilled near the other. That hole takes a cotter pin or clip, which locks the pin in place at one set hitch point and keeps it from sliding or working its way out of the joint under load and vibration. Made from steel with a protective zinc plating, the pin is strong and resists the shear forces of a pulling connection while guarding against rust and corrosion. That lets it hold a secure pivot on equipment that lives outdoors and works in dirt, moisture, and weather season after season without seizing or rusting through. Use these clevis pins for hitch and drawbar linkage, loader and bucket pins, lift arms, shackles, and round shaft ends on heavy equipment. Pair each pin with a matching cotter pin or clip to lock it in. This six-piece pack keeps plenty on hand for farm, trailer, and industrial repair projects around the shop, yard, and job site. From the Manufacturer Clevis Pins are used for securing a clevis to a load, by slotting through the holes on the prongs of the clevis. It is then secured by a cotter pin. They are used on hitches and other frequently assembled and disassembled parts and also to replace bolts or rivets.

• PINS A CLEVIS TO A LOAD: This clevis pin slides through the aligned holes in a clevis, yoke, or bracket to form a strong, load-bearing hinge point, joining linkage and pulling hardware on tractors, trailers, and heavy equipment.
• CROSS-HOLE TAKES A COTTER PIN: Measuring 1/4 inch in diameter by 2 inch long, the pin has a flat head at one end and a single cross-hole at the other that fits a cotter pin or clip, locking it in and keeping it from sliding out under load.
• ZINC-PLATED STEEL: Made from steel with a protective zinc plating, the pin is strong, shear-resistant, and guards against rust and corrosion, holding a secure pivot on equipment that works outdoors and in dirt, moisture, and weather over time.
• TRACTOR, TRAILER, AND LINKAGE: Ideal for hitch and drawbar linkage, loader and bucket pins, lift arms, shackles, and round shaft ends on heavy equipment, a dependable load-bearing pin for farm, trailer, and industrial repair work.
• TRUSTED HILLMAN QUALITY: Hillman supplies dependable pins, keys, and fastening hardware that homeowners, farmers, and pros rely on every day. Keep an assortment on hand for repairs and secure connections around the home, shop, and farm.