CONQUERALL DC 12V 5W Waterproof Submersible Pump 200L/H 2m with 3.3ft Tube for Yard Drainage, Hydroponics and Solar Fountain

This micro submersible pump uses high-quality pure copper brushless motor, with strong power, long life and low noise. It is IP68 waterproof. The motor and circuit board are sealed with epoxy resin to avoid water damage and electric leakage. This DC water pump is compact and portable, easy to hide. It delivers high head and large flow with powerful performance. Boasting low power consumption and amphibious design, it can be fully submerged. Specification Voltage: DC12V Power: 5W Current: 0.25A Minimum working voltage: 5V Flow rate: 200L/H Maximum head: 2m Noise: ≤32dB Power cord length: 1.5m Female DC jack size: 5.5mm × 2.1mm Inlet & Outlet Port: Φ8.5MM Silicone tube: ID 7mm × OD 10mm; Length: 1m Package includes: 1 × submersible pump, 1 × silicone tube Applications: aquariums, pond circulation, outdoor camping water supply, household yard drainage, basement water removal, water gardens, desktop fountain, hydroponic system, DIY water cooling system, small household appliance water circulation cooling and water supply, 3D printer & laser engraver cooling, cooler drainage, solar fountain, lapidary equipment cooling, etc. Note: 1. Maximum permitted fluid temperature is 80℃. 2. Please cut off the power supply immediately and disassemble to clean the pump rotor and shaft when insufficient power or malfunction occurs. 3. Do not allow the submersible pump to run dry or operate out of water for more than 5 minutes. 4. This pump is suitable for fresh water and seawater only. Do not use it in corrosive liquids. 5. Do not lift the pump directly by the power cord, as it may cause wire breakage. 6. The pump must be fully submerged in water during operation to ensure proper cooling.

• 【Specifications】Voltage: DC 12V, Power: 5W, Max flow rate: 53GPH (200 L/H). Minimum working voltage: 5V, Maximum head: 6.5 ft (2 m), inlet/outlet diameter: 8.5mm. Recommended silicone tube: ID 7mm × OD 10mm. AC power and overvoltage are forbidden to avoid pump damage.
• 【High Efficiency & Low Noise】Built with pure copper brushless motor for steady output and extended service life. Operating noise is controlled below 32dB, suitable for both indoor and outdoor installation. The matched impeller and bearing ensure continuous operation without overheating.
• 【Premium Sealed Structure & Safe Design】Static seal structure with stainless steel shaft effectively prevents water leakage. Whole motor and circuit board are epoxy encapsulated to reach IP68 waterproof grade, electromagnetic isolation avoids electric leakage for safe use around kids and pets. Equipped with four bottom suction cups for stable fixing on smooth surfaces.
• 【Where You Can Use It】Aquariums, ponds, outdoor camping water supply, yard/basement drainage, water gardens, desktop fountains, hydroponics, DIY water cooling, small appliances, 3D printers & laser engravers, cooler drainage, solar fountains, lapidary cooling, and more.
• 【Operation Guidelines】This pump has no self-priming function and must be fully submerged in water while running. It adapts to fresh water and seawater only, keep away from corrosive liquid. Do not run the pump dry or pull it by power cord. Max working water temperature is 80℃. Clean the pump every 1–2 weeks to maintain good performance.