6 Pack Ground Clamp, Copper Alloy Grounding Clamp for 1/2 to 1 inch Pipes

This 6 piece ground clamp set is designed for connecting grounding wire to bare metal water pipe, copper tubing, steel conduit and copper rod. The copper alloy clamp body uses two side fastening screws to hold the pipe, while the upper terminal secures the grounding conductor.Grounding and Bonding ApplicationsConnects 10 to 2 AWG grounding wire to compatible bare metal pipe, conduit or copper rodFits pipe outside diameters from 1/2 inch to 1 inchSuitable for water pipe bonding, grounding maintenance and electrical service projectsThreaded side screws allow the clamp position and holding pressure to be adjusted during installationProduct SpecificationsMaterial: Copper alloyOverall size: 2.36 inches wide by 0.67 inch thick by 2.80 inches highMetric size: 6 cm wide by 1.7 cm thick by 7.1 cm highFastening screw length below clamp body: 2.09 inches or 5.3 cmCenter opening height: 0.51 inch or 1.3 cmSide clamp body height: 0.28 inch or 0.7 cmUpper terminal width: 0.24 inch or 0.6 cmCompatible pipe size: 1/2 inch to 1 inch outside diameterCompatible wire range: 10 to 2 AWGPackage quantity: 6 ground clampsInstallation NotesMeasure the pipe diameter before installation. Remove paint, coating, rust and debris from the selected contact area to expose clean and dry metal. Position the clamp around the pipe and tighten both side screws evenly. Insert the stripped grounding wire into the upper terminal and tighten the terminal screw. Check the clamp and conductor connection after installation.Package Contents and CompatibilityThe package contains 6 copper alloy grounding clamps with pipe fastening screws and wire terminal screws. These clamps are intended for compatible bare metal surfaces. They are not intended for PEX, PVC, painted pipe, coated pipe, insulated surfaces or pipe sizes outside the stated range. Installation and connection verification should follow applicable local electrical requirements.

• Exact Fit & Compatibility : Specifically designed for 1/2" to 1" bare metal pipes, copper tubing, or rods, and easily connects #10 to #2 AWG grounding wires. This precise sizing ensures a perfect match for your grounding needs and prevents installation issues.
• Superior Conductivity & Stability : Crafted from high-grade copper alloy, this ground wire clamp delivers superior conductivity and exceptional corrosion resistance. Designed with a formed toothed jaw and dual-screw configuration, it bites firmly into the pipe to prevent slipping and ensures a highly secure, low-resistance connection.
• Secure Pipe Hold : The formed clamp opening contacts the pipe while two threaded side screws apply balanced pressure from both sides. This structure helps reduce movement after the screws are tightened evenly, keeping the clamp firmly locked in place.
• Easy to Install : Comes with its own fixing screws so no extra hardware is needed. Simply place the clamp on the exposed metal pipe, insert the ground wire, and tighten. Adjust to the proper tightness during installation and avoid overtightening to prevent damage to the pipe or conduit. Ideal for electricians installing, repairing, or replacing old ground clamps.
• Application Notes:Intended for bare metal pipes only. Painted, coated, insulated, and nonmetallic pipes can block electrical contact. Please confirm the pipe diameter, surface condition, and wire gauge before installation.