3PCS Photocell Sensor for Outdoor Lights Dusk to Dawn Sensor for Outdoor Lighting 120-277V Photoelectric Switch Photo Cell Light Sensor Hard-Wired Post Eye Light

Photocell Sensor For Outdoor LightsSpecifications： 🔸Rated Voltage: 100-277VAC 🔸Rated Frequency: 50/60Hz 🔸Rated Loadings: 500w Tungsten/850VA Ballast/5A E-Ballast 🔸Power Consumption: 2W 🔸Operate Level: 10-20Lx On/30-80Lx Off 🔸Ambient Temp: -40°C~+70°C 🔸Related Humidity: 99% ✅Package includes: 3* Photocell sensor 3* waterproof cap The photocontrol is compatible with most hardwired outdoor lighting fixtures and bulbs and requires a mounting hole of less than 0.6 inches in diameter. ⚫The black wire is the ground (-) of the battery connector or power source, the load common or ground is not involved with this connection ⚪The white wire is the positive (+) of the switch (the positive connection of the load goes to the positive of the battery together in parallel ) 🔴 The red wire(the actual switched wire) is the ground (-) of the light, It switches the ground to the load. Connection method： 1️⃣The WHITE wire and the Positive Connection of the Load goes directly to the positive connection of the source or battery. Both wires. The load and the switch positive in parallel. 2️⃣The BLACK wire from the switch goes directly to the negative or ground of the source or battery. Note: This will be the only ground or common connection to the source or battery. 3️⃣The RED wire is the actual switched wire. It switches the ground or common connection of the load to the source or battery. The red wire of the switch connects to the load common or ground. Warm notes: ▪️Remember that LEDs operate on DC power, and other voltages are not suitable. ▪️When you are testing the photocell, be sure to turn on the power and wait up to 5 minutes for the photocell to switch load off. ▪️For further testing cover the photo control completely with black tape or another dark material to simulate night conditions. ▪️Do not face the photocell into the midday sun. ▪️Do not face the photocell to artificial or reflected light. ▪️Standard size for use residential outlet box, post lamp poles or wall pack fixtures.

• Rated Voltage: 120-277VAC;Ambient Temp: -40℃~+70℃;Sensing distance: 3-8M; Load power:500W;Power Consumption: 2W
• Smart Outdoor Photocell Sensor -- Automatically turns light on at dusk and off at dawn. 3-10 Seconds time-delay can avoid false on/off triggers due to spotlight or lightning.
• Weatherproof:Our outdoor light sensor is built to IP65 standards, featuring a waterproof cap and a wall plate with an integrated gasket. The dual-protection lens can prevent the accumulation of dirt and dust, guaranteeing reliable performance even in rain, high winds, and snow.
• Wide application range: suitable for automatic switching control of solar LED lights, street lights, courtyard lights, corridor lights, and other lighting fixtures (please remember that LEDs use DC power, other voltages are not applicable); can also be used as photoelectric switches for small rainproof street light controllers
• Easy to Install: the photo control can work with most fixtures and bulbs for hardwire outdoor lamp posts, which are required a mounting hole less than 0.6 inches in diameter; Disconnect power, remove junction box cover, place the photocell light switch in knockout hole and fasten with lock nut