2X All Thread Repair Bit for Drill Bolt and Chamfering Deferer Threaded Rod Cutter Burr Remover Deburring External Chamfer Tool Also Tread Cleaner Works with 3–19 mm (2 Count)

Deburring External Chamfer Tool This deburring external chamfer bit restores damaged bolts, threaded rods, and pipe ends. It installs like a drill bit and works with angle drills. Designed for external edge finishing, it creates chamfers and lead-ins that help nuts start on threaded fasteners. As a bolt deburring tool and thread repair tool, it removes burrs without excessive material removal. Low RPM operation provides controlled finishing. This deburring tool for metal works on iron, stainless steel, aluminum, copper, and rigid plastics for workshop and repair use. The 1/4 inch (6.35 mm) hex shank fits screwdriver bit holders and power tools for threaded rod deburring and post-processing tasks. Key AdvantagesRestores damaged bolt tips for thread startsActs as a bolt chamfering tool and threaded rod deburring toolRemoves sharp edges and burrs for assemblyUsed for repairing damaged fastener endsDesigned for low RPM operation with light pressureTechnical DataOverall Length: approx. 60.98 mm (2.40 in)Head Diameter: approx. 27.22 mm (1.07 in)Shank Size: 1/4" hex (6.35 mm)Working Range: 1/8"–3/4" (approx. 3–19 mm)Weight: approx. 70–90 gMaterial: Alloy steelFinish: Silver head with black shankScope of Delivery2 × Deburring External Chamfer Tool Bit (1/4" hex shank)Protective storage cap or tubeImportant Note This tool is designed for external deburring and chamfering only. It is not intended for cutting new internal threads or for use as a screw extractor or threaded rod cutter.

• 𝗦𝘂𝗽𝗽𝗼𝗿𝘁𝗲𝗱 𝘀𝗶𝘇𝗲 𝗿𝗮𝗻𝗴𝗲 : this all thread deburring tool covers external thread ends from approximately 3–19 mm (M3–M18), producing a clean external chamfer that helps nuts start smoothly on common Metric, UNC, and UNF fasteners. Ideal for bolts, studs, threaded rod cutter, and pipe nipples—especially after cutting or when tips are mushroomed, bolt chamfering tool. Optimized for low RPM and light pressure, this external Deburr chamfer tool (bolt deburring tool) is designed for cleanup only and is not intended for cutting new internal threads.
• 𝗠𝘂𝗹𝘁𝗶-𝗺𝗲𝘁𝗮𝗹 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗹𝗲 : Works reliably on iron, aluminum, copper pipe, and steel (including stainless), delivering a consistent lead-in without gouging soft alloys or overheating harder ones deburring chamfer tool. The carbide geometry delivers a crisp finish for clean seating and faster re-assembly. A must-have chamfer bit for workshop standards, including 1/8 NPT prep and general cut-end finishing.
• 𝗦𝗮𝘃𝗲 𝗺𝗼𝗻𝗲𝘆 𝗼𝗻 𝗿𝗲𝗽𝗹𝗮𝗰𝗲𝗺𝗲𝗻𝘁𝘀 : Restore damaged bolts instead of tossing them extend fastener life and reduce scrap and downtime. Ideal for users who want quick results with a drill, and trusted by mechanics as a thread repair tool for fast cleanup. Great for on-the-spot bolt thread repair or as a bolt thread cleaner—keeping your projects moving without emergency parts runs
• 𝗗𝗲𝗯𝘂𝗿𝗿, 𝘀𝗺𝗼𝗼𝘁𝗵 𝗲𝗱𝗴𝗲𝘀, 𝗮𝗻𝗱 𝗳𝗶𝘅 𝘀𝗰𝗿𝗲𝘄𝘀 : Fast cleanup with an external deburring tool for metal that creates a clean chamfer for easier starts. Easy to use as a deburring tool for drill just chuck it up and go (low RPM + light pressure). Works as a bolt deburring tool and thread cleaner tool for quick edge smoothing and reliable hardware re-assembly.
• 𝗥𝗲𝗹𝗶𝗮𝗯𝗹𝗲 𝘀𝘂𝗽𝗽𝗼𝗿𝘁 & 𝗽𝗲𝗮𝗰𝗲 𝗼𝗳 𝗺𝗶𝗻𝗱 : Enjoy 30-day hassle-free returns if the tool isn’t a fit. Our support team provides fast troubleshooting, usage tips, and defect replacements under our standard policy.