2Pcs High Power BTS7960 DC Motor Drive Module 43A H-Bridge Motor Controller Board for Smart Car Current Compatible with Arduino
Product details
| Management number | 250262963 | Release Date | 2026/09/17 | List Price | US$6.00 | Model Number | 250262963 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Parameters: Model: IBT-2 Input voltage: 6V-27V Max current: 43A Input voltage level: 3.3-5V Control mode: PWM or level Duty cycle: 0-100% Current regulation output: Yes Size: 50*50mm Weight: 60g Features: 1. Dual BTS7960 high current (43A) H-bridge driver 2. Isolate from MCU 5V, effectively protect MCU 3. Able to realize motor forward and reverse, two PWM inputs with high frequency of 25kHZ 4. Two overcurrent and overheating error signal outputs 5. Isolation chip 5V power supply (can share 5V with MCU) 6. Power supply voltage 5.5V to 27V 1 PRWM: Forward rotation level or PWM signal input, active high 2 LPWM: Reverse rotation level or PWM signal input, active high 3 R_EN: Forward driver enable input, high level enable, low level off 4 L_EN: Reverse driver enable input, high level enable, low level off 5 R_IS: Forward drive side current alarm output 6 L_IS: Reverse drive side current alarm output 7 VCC: +5V power input, connect to the 5V power supply of MCU 8 GND: Signal common ground terminal How to use? Method 1: VCC is connected to the 5V power supply of the MCU, and GND is connected to the GND of the MCU. R_EN and L_EN are short-circuited and connected to 5V level, the driver can work. L_PWM, input PWM signal or high level motor forward. R_PWM, input PWM signal or high level motor reverse. Method 2: VCC is connected to the 5V power supply of the MCU, GND is connected to the GND of the MCU. R_EN and L_EN of the MCU short-circuited and connected to the input PWM signal speed control. L_PWM, the pin input 5V level, motor forward. R_PWM, the pin input 5V level, motor reverse.
- Double BTS7960 H-bridge motor drive module supports 6V-27V input, 43A max current, and 3.3-5V input level
- With overheat and overcurrent protection function
- Input ports include RPWM (forward), LPWM (reverse), R_EN/L_EN (enable), R_IS/L_IS (alarm), VCC (+5V output), and GND
- Two BTS7960 chips form an H-bridge, 74HC244 chip for signal isolation processing
- Reserved mounting holes for easy installation and fixation, with a rear heat sink for improved heat dissipation
| ASIN | B0GZW3GK1C |
|---|---|
| Voltage | 5 volts_of_direct_current |
| Brand Name | SazkJere |
| Item Weight | 60 g |
| Part Number | SJ101 |
| Manufacturer | SazkJere |
| Number of Items | 2 |
| Included Components | 2Pcs BTS7960 Motor Drive Module 43A |
Bestseller ranking
Motor Drives
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form