2PCS 2.5" Exhaust Clamp with Exhausts Hanger & Muffler Hanger

Clamp It Tight, Hang It Right — The Adjustable Exhaust Kit That Quiets Your RideProduct AttributesColors: SilverSizes:Exhaust Clamp Total Size: 9.84*4.82*0.65 inchU-clamp Wire Diameter: 0.35 inch / U-type Bbayonet Size: 2.5 inchHanger Overall Length: 9.84 inch / Transverse Length: 3.20 inch / Thread Diameter: 3/8 inchMuffler Hangers Total Size: 2.87*1.82*0.81 inchHole Diameter: 0.45 inchHole Spacing: 1.09 inchWeight: 31.06 ozMaterial: Galvanized Carbon SteelPackaging: U Clamp*2, Hanger*2, Rubber Muffler Hangers*2Packaging Sizes: 11.02*5.32*1.28 inchProduct Functions & Features1. Secure Pipe Hold & Quiet Operation: The saddle‑style clamp grips 2.5‑inch muffler or exhaust pipes firmly, while the two rubber muffler hangers absorb vibration to cut down rattles and exhaust drone, helping to keep the cabin quieter2. Adjustable Hanger Support: A 9.84‑inch hanger rotates up, down, or a full 360° by turning the nut, adapting to different vehicle layouts and providing solid support wherever the pipe needs to be secured3. Galvanized Carbon Steel Build & Complete Kit: The zinc‑coated carbon steel resists rust from water and road spray, and the kit includes two clamps, two hangers, and two rubber muffler hangers — everything needed in one box for a full exhaust joint repair or hanger replacement

• Pipe Compatibility: This clamp is sized for 2.5‑inch exhaust piping and is designed to secure the muffler or exhaust pipe itself, holding the tubing firmly in place within the system. Before ordering, check your pipe diameter to confirm a proper fit for your vehicle's exhaust layout
• Quiet Operation & Rubber Dampers: Loose joints often cause rattles and exhaust drone. This exhaust pipe clamp uses a saddle design for even clamping force, and the two included rubber muffler hangers absorb vibration to further cut down noise, helping to keep the cabin quieter
• Adjustable Hanger: A 9.84‑inch hanger is attached to the side of the exhaust clamps. The mounting angle can be set by turning the nut, allowing the hanger to rotate up, down, or 360° to match different vehicle layouts and provide solid support wherever the pipe needs to be secured
• Galvanized Carbon Steel: The muffler hanger body is made from carbon steel with a zinc coating that shields the metal from water and road spray. This protective layer helps slow rust and keeps the hardware intact through repeated heat cycles and wet conditions
• Kit Contents: This adjustable kit includes two exhaust clamps, two hangers, and two rubber muffler hangers. U-type clamp wire diameter is 0.35 inch, the diameter of the U-type bayonet is 2.5 inch, the cross length of the hanger is 3.20 inch, the diameter of the thread is 3/8 inch