200AH Lead Acid Battery Desulfator 12-48V Auto Pulse Desulfator 2A Battery Regenerator Extending Battery Life

Specification Input Voltage: DC12V~48V Peak Voltage: 60-100V Operating Current: Max. 70mA Peak current: Max. 2A Pulse frequency: 65KHZ Cut-off current: <5mA Weight: Approx. 100 grams Dimensions: 7.5 x 5 x 2.4 (cm) Compatible Batteries: Lead-acid batteries such as AGM, SLA and VLRA Feature ●Automatic identification battery voltage ●Reverse connection protection ●Battery-friendly soft peak pulse system ●Automatic power-off function prevents over-discharging of batteries ●Manual selection of voltage settings ●Waterproof design:Safe to use even in case of sudden rain or splashing water The Benefits of Removing Sulfate ●Environmental friendly ●Restore the battery capacity ●Significant extension of battery life ●Shorten the charging time ●Extend the time of natural discharge ●Prevention of lead sulfate ●It can be connected to the battery regardless of the battery is being charged or not ●If the error lamp is lit, check that the positive and negative poles of the battery whether connected in reverse ●If there is structural damage such as damage to the battery pole plate, this product cannot be used.

• [The main reason for the deterioration of lead-acid battery] When lead-acid battery is repeatedly charged and discharged for a long period of time, the sulfuric acid in the electrolyte and the lead in the electrode will undergo a chemical reaction and turn into lead sulfate crystals (sulfation), which is the main reason for the deterioration of the battery and the charging failure
• This product uses the high-frequency peak pulse to prevent lead sulfate crystals from sticking to the electrode, and gradually decomposes and removes the lead sulfate, extending the life of the battery and keeping the electrode in a near-new state
• [Effect] You will feel the battery performance improvement after 2-3 weeks of use. It depends on the usage of the battery and the amount of lead sulfate crystals, the more lead sulfate crystals accumulate, the longer it will take
• [Easy to use]Connect the red to the positive (+) terminal of the battery and the black to the negative (-) terminal of the battery. Once connected, the battery voltage will be recognized automatically without manual setting.If the device is not working, check whether the voltage is too low. Please try again after charging
• [Compatible Batteries] 12V~48V, Max 200AH lead-acid battery,such as AGM, SLA and VLRA