1L One Person Brake Bleeder Kit with One Way Brake Bleeder Valve & 27"" Hose

Hang It, Bleed It, Store It — The All‑In‑One Brake Kit Built Product AttributesColors: TranslucentSizes: 8.26*3.63*3.63 inchWeight: 7.10 ozMaterial: PE, PVCPackaging: 1*Brake Fluid Bleeder, 1*One-Way Valve, 2*Hoses, 1*Connector, 4*Hose Clamps, 1*Fluid ExtractorPackage Sizes: 11.81*8.26*3.73 inchHow to Install1. Connect two hoses to either end of the check valve2. Connect the other end of the hoses to the brake fluid reservoir3. Attach the connector to the end of the hose4. Pay attention to the flow direction of the check valve (the arrow should point toward the brake fluid reservoir)5. Secure each connection with a hose clamp to prevent fluid leaksInstructions for Use1. Connect the brake bleeding hose to the catch bottle2. Attach the hose to the bleeder screw at the brake farthest from the master cylinder3. Open the bleeder valve on the vehicle and pump the brake pedal several times4. Once the hose is filled with brake fluid and no air bubbles are visible, close the bleeder valve. Repeat this process for the remaining wheelsProduct Functions & Features1. Clean, Safe Bleeding: The aluminum check valve sends fluid only toward the bottle, stopping air and used fluid from creeping back into the caliper. This supports a bubble‑free bleed, a firm pedal, and consistent braking performance2. Solo‑Friendly Design: A 27.95‑inch hose setup and a built‑in hanging hook give you room to work and keep both hands on the brake pedal. The bottle stays upright and out of the way while you complete the job alone3. Durable & Complete Kit: The PE collection bottle and PVC hoses resist brake fluid degradation and rinse clean after each use. The box includes a bottle, one‑way valve, two hoses, two connectors, a dropper and four hose clamps — everything needed to bleed brakes on most cars, trucks, SUVs, and motorcycles

• Cleaner Bleeding Process: A one‑way check valve inside this brake bleeder kit lets old fluid and air flow out while blocking from returning into the caliper. This helps produce a bubble‑free bleed that supports a firm, responsive brake pedal after each service and avoid secondary failures
• Longer Hose Reach: The two hoses in this brake bleeding kit combine to span 27.95 inches, giving you extra working room. These brake system bleeding tools come with a built‑in hook and chain that let you hang the bottle from a suspension part or frame rail, freeing both hands so one person can complete the bleed
• Built for Repeat Use: These brake system bleeding tools are made to serve through many maintenance cycles. The PE collection bottle and PVC hoses resist degradation from brake fluid and rinse out quickly after use — just wash, air‑dry, and put them away for the next service without losing performance
• Fits Most Vehicles: This brake fluid bleeder hooks up to hydraulic brake and clutch systems on cars, trucks, SUVs, and motorcycles. The standard hose diameter slips onto most bleeder screws and forms a snug seal, making the tool useful for home garages and professional shops alike
• Step‑by‑Step Bleeding: Attach tubing to the check valve and the catch bottle. Fix the connector to the hose end — the arrow on the valve faces the bottle. Tighten with the clamps, then hook the connector to the bleeder. Pump the pedal; keep the line stays full and shows no air pockets. Keep going until fresh fluid comes through