1DFAUL RTV Silicone Gasket Maker, High Temp Silicone Resist Oil, Red, 170g

High temperature silicone sealant is a sealing product specially used for automobile engines. It can form a uniform, stable and continuous thin layer on the joint surface of parts, and can fully fill the depressions and microscopic gaps on the joint surface to complete the seal. Can be turned into various types of sealing silicone gasket after curing. Scope of application: various types of engines, gearboxes, front and rear axles, pumps, superchargers, Valve Covers And Valve Guides, Oil Pans The reasons for ineffectiveness may be: 1. High temp sealant does not conform to the environment at that time, such as high Temperature environment, high heat silicone sealant cannot be used. 2. Uneven coating. 3. Insufficient curing time, environmental changes will extend the curing time. 4. Surface oil stains have not been cleaned, resulting in weak bonding. 5. RTV silicone gasket maker has aged. NOTE: 1. Conduct a sealing test after sealing to prevent damage to the instrument during actual use. 2. Different environments require different curing times: 25℃, 10~30min (room temperature) 3. Applicable temperature: - 60~+300°C 4. Ultimate pressure: room temperature: ≥10MPa 5. Do not come into with uncured RTV silicone sealant

• Our RTV silicone is a sealing product specifically designed for automotive engines to prevent oil and gas leaks and ensure efficient operation. Our silicone sealant can also be used in gearboxes, front and rear axles, and pump superchargers, form various silicone gasket
• Our gasket sealant cures quickly into a leak-proof gasket that replaces cutting gaskets. They are flexible and will not shrink or crack even under high temperature, cold, high pressure, or vibration, maintaining a strong bond
• Our high temperature silicone sealant is oil-resistant, non-corrosive, water proof, freeze-proof, fully fills gaps in surfaces, seals completely, prevents fluid leakage and reduces energy loss
• Suggestions for use: After cleaning the oil on the surface with cleaning fluid, apply high temperature silicone evenly. During the curing process, a certain amount of pressure needs to be applied to ensure that silicone RTV fully fills the gaps
• NOTE: Carry out a sealing test after sealing to prevent damage to the instrument during actual use; Curing time is different in different environments, eg: 25℃, 10~30min; Applicable temperature: - 60~+300°C; Ultimate pressure: ≥10MPa